Description

DTF Transfers can go on any T-shirt. (colors pop more when the fabric is lighter)  It has a thinner feel than vinyl.

Adult S longest side Approximately 11″

Adult M longest side is Approximately 12″

Adult XL longest side is Approximately 13″

Youth 9″

Toddler 8″

Infant 6″

**Must use a Heat Press

Pressing Instructions

Heat press temperature should be set to 325 F.

Prior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process.

After the transfer is warmed up, it is ready for step 2.

Use Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, wait until cool and peel.

Use a cover sheet (Teflon or white butcher paper/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.

If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool a bit before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.

Processing Time 3-5 Business Days

Machine wash cold

Tumble dry low